Leave a loose end of approximately 50 mm through the clip as show in photo 4.

Place the clip and strap on the pack as shown in photo 5 and thread the strap away down and around the pack.

Thread the strap back up and pass it through the centre of the clip as show in photo 6.

Loop the strap around and thread it back through the end slot of the clip as shown in photo 7.

Take up the slack strap so it is placed loosely around the pack.

To pull the strap tight lock the bottom strap with one hand and pull through the slack strap with the other hand as     shown in photo 8 above, as the final tension is applied the clip will roll over to lock the straps and hold the tension as shown     in photo 9.